Gunsmithing

CLEAN AND OIL CUSTOMER GUN

Consisting of completely stripping gun, cleaning all parts, Checking for wear,making suggestions to a customer Of services needed to put in A-1 condition

$50 - $75

METAL FINISHING

Oxynate and re-bluing abrasive/bead blast/ wire wheel(matte) finish

$120 - $300

Deluxe Finish:same as above followed by ##240 grit and ##400 grit polish with new screw holes And corners protected and square Handgun

$130 - $320

Rifle/shotgun

$150 - $325

Master finish same as deluxe finish With all polishing marks removed,no ripples And finished with ##555 polished to a mirror finish Handgun

$265 - $375

Rifle/shotgun

$300 - $400

SPRAY- ON FINISHES

pricing for single color for Handguns and long guns ; does not include price Of assembly/disassembly Cerakote

$150 - $250+

SIGHT WORK

Sight in customer gun-does not include Cost of ammo targets etc

$50 - $100

BORE SIGHTING CUSTOMER GUN

$50

DRILL AND TAP BARREL OR RECEIVER FOR SIGHTS- Per Hole

$50

CUT Dovetail IN BARREL

$60 - $100

INSTALL DOVETAIL SIGHT

$50 - $50+

INSTALL FRONT SIGHT RAMP

Sweat on type

$50 - $100

Screw on type( including drill and tap)

$60 - $80

Band Type

Hourly Rate

INSTALL INSERT IN PISTOL SIGHT

$50 - $60

GENERAL BARREL,ACTION & RIFLE WORK

Check Headspace

$50 - $70

MAKE CHAMBER CAST

$50 - $95

REMOVE STUCK FIRED CASE FROM CHAMBER

$50+

REMOVE LIVE ROUND FROM CHAMBER

$65 - $150+

REMOVE OBSTRUCTION FROM BORE

HOURLY RATE

REMOVE FOULING FROM THE BARREL

HOURLY RATE + MATERIALS

LAP BARREL

$50 - $130+

INSTALL FRONT/MID RIB SHOTGUN BEAD

(plus cost of bead)

$50 - $75

Plug hole and re-drill for bead

$50 - $75

INSTALL RECEIVER SIGHTS

Gun drilled and tapped

$50

HANDGUN WORK

Revolver Action Job (Clean,Smooth Action,Not Including Replacement Parts

$75 - $160

Rebarrel Revolver -Remove Old Barrel Replace With New Factory Barrel , Labor Only (Does Not Include New Barrel)

$75

Remove/Modify Revolver Hammer Spur

$50 - $80

Semi-Auto Pistol Action Job ( Clean Smooth Action, Not Including Parts

$130

Tighten Slide Of 1911 Auto

$120 - $175

FIT BARREL TO 1911 AUTO, NOT INCLUDING BARREL

Non ramped barrel

$90 - $150

Ramped Barrel

$100 - $175

FIT AND INSTALL BARREL BUSHING ON 1911

Does not include cost of bushing

$90

THROAT,POLISH BARREL AND FEED RAMP OF 1911

$60

FIT NEW TRIGGER TO 1911

does not include cost of trigger

$50

FIT CUSTOM HAMMER TO 1911

does not include cost of hammer

$75

CUT Slide for bo-mar(w/o sight Plain cut w/slide shields

$160

CUT SLIDES FOR DOVETAIL FRONT SIGHT

$95

w/o cost of sight Cut slide for novak rear(w/o cost of sight)

$100

INSTALL STAKE-ON FRONT

(w/o cost of sight)

$60

INSTALL FIBER OPTIC FRONT SIGHT

(existing dovetail)

$50

INSTALL REAR SIGHT

existing dovetail, w/o cost of sight)

$50

MODIFY 1911

auto frame for beaver tail safety Includes fitting of safety, does not include cost of safety

$50

INSTALL PRE-THREADED & CHAMBER

BARREL- not including polishing & bluing

$125 - $200

LAP IN BOLT LUGS- not including setting barrel back Or fitting new barrel

$50 - $75

WELDING ON A NEW BOLT HANDLE

$150

TRIGGERS (installation or adjustment) Shilen, Timney, Dayton-traister, Moyer type

$60

Double set

$100 - 250

Single set

$50 - 140

INSTALL MUZZLE DEVICE(threaded barrel does not include muzzle c device)

$50

SCOPE MOUNTING

Gun drilled and tapped

$50

STOCK WORK

GLASS BEDDING BARREL & ACTION

Hunting Rifle

$150

INSTALL RECOIL PAD

labor only

$80

INSTALL ADJUSTABLE BUTT PLATE

$80 - $150

INSTALL SLING SWIVELS

(Std and Q/D Simple installation in butt stock

$25 - $50

Hydraulic recoil plate

$150 - $210

Drill stock and install recoil pad

$50 - $95

FIT BED AND FINISH FIBERGLASS STOCK

$175 - $350

PRE FINISHED SYNTHETIC STOCK

Fit and install barrel action

$50 - $50

AR-15 WORK Maintenance and cleaning( disassembly cleaning and oil

$60

Rebuild and maintain( includes new springs and new gass rings added to cleaning)

$120

Install aftermarket trigger

$60

Install free float

$100

Assemble complete upper

$65

Assemble complete Lower

$65

Assemble complete rifle

$150

Install muzzle device on a pre threaded barrel

$25

Thread barrel

$175

Open gas port for functioning

$60

Install or replace gas block (not including gas block)

$50

Install or replace AR barrel

$60

Install or replace Buttstock and buffer

$50

CUT & CROWN BARREL

Rifle and shotguns/ handguns

$50 - $95

SHOTGUN WORK

LONG FORCING CONE

Non-plated bores ,per barrel

$55 - $80

Plated bores,per barrel

$75 - $100

RESOLDER RIB

not including bluing

HOUR RATE

STRAITEN OR ADJUST BARREL

$50 - $95

POLISH CHAMBER/BORE

$50

MUZZLE LOADER WORK

Pull ball

$50 - $75

Remove broken ramrod

$60 - $100

Stuck breech plug

$60 - $120